COM.LTE(4G) is a stackable multifunctional LTE communication module, built-in LTE communication module SIM7600G, supports LTE-TDD/LTE-FDD/WCDMA and GSM frequency bands, supports LTE.CAT4 (downlink speed is 150Mbps), supports voice calls SMS with SMS. It has stable performance, small appearance, high cost performance, and can realize the transmission of SMS and data information with low power consumption. The module has a DC power input and can provide 5V-12V power supply through an external power supply. In order to facilitate the user to configure the pin, the DIP switch is used to set the pin. The onboard microphone and 3.5mm headphone jack support the insertion of headphone with microphone. This module is especially suitable for scenarios that require high-speed network connections, such as video calls, drone data transmission, industrial Internet of Things, etc.
COM.LTE(4G) RXD/TXD can be connected to M5Stack's UART (TX(0/13/17)RX(5/15/16)) by setting the DIP switch, GPIO in M5Stack Fire 16/17 It is connected to PSRAM by default. It is recommended to use any one of the remaining two groups of pins.
Dial the DIP switch on the side of the audio configuration pin to ON when in use
Data transmission speed:
|Network protocol||TTCP/IP/IPV4/IPV6/ Multi-PDP/FTP/FTPS/HTTP/ HTTPS/DNS etc.|
There is a small problem with the board. when I plug it in none of the other boards below will stay on. The pins are to short to make contact with the COM.LTE Module thus my M5 stack is backless. Working on a product and it will not work to sell them a backless M5.