BALA2 is short for 'Balance', as its name suggests, it is the second generation of M5Stacks balancing robot series. BALA2 is a Self Balancing Robot consisting of am M5Stack Gray and two wheels(DC motors).The base uses STM32F030C8T6 as the main control and has a two-way encoding motor driver and built-in 1200mAh battery.
This robotics product comes with preloaded software. A self-balancing robot application which balances the robot vertically using a closed-loop algorithm. You can program it to automatically move around through programming, or you can combine WiFi and Bluetooth to develop remote control functions.
This Robot is controllable by a Smartphone device or a Transmitter. The BALA2 base contains a wealth of interfaces. In addition to the conventional PortB and PortC, it also supports 8-channel servos, of which 4 channels can be directly connected, and the remaining 4 channels need to be connected from the inside of the base. Even if you have never attempted such a balancing robot program, you can quickly get the hang of it and control it through UIFlow. The self balancing robot uses data from the Accelerometer and Gyroscope to correct its orientation and position.The 2 DC driver module communicates with M5Stack Gray through I2C(0x3A).
Note: BALA2 has been calibrated , and it can automatically maintain its balance after turning it on. For manual calibration, please refer to Quick Start
|ESP32||240MHz Dual Core，600 DMIPS，520KB SRAM，Wi-Fi，Dual-mode Bluetooth|
|LCD||2.0 inch, 320x240 Color TFT LCD, ILI9342C|
|Ports||GROVE I2C*1/UART*1/GPIO*1/SERVO*4(+4 Extendable Channel)|
BALA2 ESP32 Self-balancing Robot Kit
Need Arduino script Bala2 JoyC please...
Great product, once I get my JoyC to control it I will be most pleased.
PS: if anyone has any code for this, please let me know.
Cute, lovely, I have already added Lego nubbins to a tiny lidar to fit to it.