Description

Description

M5CameraF is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel carmera(OV2640).M5CameraF offers plenty of storage, with an extra 4 Mbyte PSRAM. It also supports image transmission via Wi-Fi and debuging through USB Type-C port.

The hardware comes preloaded software, programmed by ESP-IDF. It is an application to run Wi-Fi camera. The output image is size 600*800, since it’s 2-Maga camera, you sure can optimize the software to output the maximum size of photos.

what this software can do?

• Power the board via USB type-C or GROVE
• Use your phone to Wi-Fi scan an AP name start with ‘m5stack-‘ and click to connect this AP.
• Open up web browser on your phone and visit 192.168.4.1
• Then here comes the picture. Video is about 5-6 frames per senconds. not super fast.

The hardware also comes with some reserved weld pad, just in case you want put these chips back on board.

• 9-axis gyroscope (MPU6050)
• pressure sensor (BME280)
• Digital silicon microphone (SPM1423)
• Lipo Battery power pins

Product Features

• ESP32 specifications
  • Dual-core Tensilica LX6 microprocessor
  • Up to 240MHz clock frequency
  • 4MB PSRAM
  • 4MB Flash memory
  • Integrated 802.11 BGN WiFi transceiver
  • Integrated dual-mode Bluetooth (classic and BLE)
  • Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096)
• CP2104 USB-to-TTL converter
• ESP32-WROVER (PCB Antenna)
• OV2640 sensor
  • Output Formats(8-bit):
    • YUV(422/420)/YCbCr422
    • RGB565/555
    • 8-bit compressed data
    • 8-/10-bit Raw RGB data
  • Maximum Image Transfer Rate according to specific format
    • UXGA/SXGA: 15fps
    • SVGA: 30fps
    • CIF: 60fps
  • Scan Mode: Progressive
• Camera specifications
  • Field of View : 160 degree
  • Maxmium Pixel: 2-Mega
• Sensor best resolution: 1600 * 1200
• Size：23.5 × 48 × 23.5mm

Include

• 1x M5CameraF
• 1x LEGO Adapter
• 1x Wall/1515
• 1x Type-C USB(20cm)

More information

Related Link

• Product Document