COM GSM is a stackable 2G communication module, with the SIM800C communication module built-in. The working frequency of COM GSM is GSM/GPRS 850/900/1800/1900MHz,and it can transmit SMS and data information with low power consumption. The module has a DC power input and can provide 5V-12V power supply through an external power supply. In order to facilitate the user to configure the pins, the DIP switch is used to set the pins. This module is especially suitable for remote meter reading, smart wearables, smart parking, municipal management and other IoT industries with ultra-low power consumption and small size as the core requirements.
COM GSM RXD/TXD can be connected to M5Stack's UART (TX(0/13/17)RX(5/15/16)) by setting the DIP switch. Since these GPIO in M5Stack Fire 16/17 are connected to PSRAM by default, conflicts may occur when using GSM. It is recommended to use any set of UART pins in the remaining two groups.
The DIP switch on the right is invalid for the GSM module, no need to set.
Stackable design
Support SMS text and data transmission
Independent external power supply
AT command control
SIM card type: MicroSIM
Status signal: two LED indicators (power/network status)
Power supply voltage: 3.4-4.4V
Typical power consumption in sleep mode: 0.88mA
External antenna: SMA antenna 2.5dBi
Serial communication: UART 115200bps
Operating temperature range: -40°C to +85°C
Frequency band:
data transmission：
| Resources | Parameter |
| Frequency band | GSM/GPRS 850/900/1800/1900MHz |
| Network protocol | TCP/IP/UDP/FTP/HTTP etc. |
| Communication | UART 115200bps |
| Antenna Gain | 2.5dB 1880-1900MHZ/2320-2370MHZ 2575-2635MHZ |
| Net Weight | 40g |
| Gross weight | 75g |
| Module Size | 54*54*13.2mm |
| Package Size | 165*60*36mm |
